013 XXXXXXXX
Demo
Manufacturer’s specs
Transport section
m Compatible disc formats 2-channel Super Audio CD
CD
m Data read principle Non-contact optical pickup
m Laser diode wavelength SA-CD: 650 nm
CD: 780 nm
m Transport section outputs HS-LINK Connector type: RJ-45
Suitable cable: Dedicated HS-Link cable
COAXIAL Format: IEC 60958 compliant
OPTICAL Format: JEITA CP-1212 compliant
Digital processor section
m Digital inputs HS-LINK Connector type: RJ-45
Suitable cable: Dedicated HS-Link cable
COAXIAL Format: IEC 60958 compliant
OPTICAL Format: JEITA CP-1212 compliant
Sampling frequency
32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
(16 to 24 bits, 2-channel PCM)
Only via HS-Link
176.4 kHz, 192 kHz (24 bits, 2-channel PCM)
2.8224 MHz (1 bit, 2-channel DSD)
m D/A converter MDSD principle (DSD signal)
MDS++ principle (PCM signal)
m Frequency response 0.7 – 50,000 Hz +0, –3.0 dB
m Total harmonic distortion + noise 0.0008% (20 to 20,000 Hz)
m Signal-to-noise ratio 114 dB
m Dynamic range 110 dB (24-bit input, low-pass fi lter off)
m Channel separation 108 dB (20 to 20,000 Hz)
m Output voltage and impedance BALANCED: 2.5 V 50 ohms, balanced XLR type
UNBALANCED: 2.5 V 50 ohms, RCA phono jacks
m Output level control 0.0 dB to –80.0 dB (digital)
General
m Power requirements AC120 V/230 V (Voltage as indicated on rear panel)
50/60 Hz
m Power consumption 30 W
m Max. dimensions Width 465 mm (18-5/16″)
Height 150 mm (5-7/8″)
Depth 393 mm (15-1/2″)
m Mass 18.5 kg (40.8 lbs) net
25.0 kg (55.1 lbs) in shipping carton
- High-grade SA-CD/CD drive
- Innovative MDSD digital signal processing
- MDS++ type D/A converter using six parallel devices
- “Direct Balanced Filter” with totally separate balanced and unbalanced signal paths
- HS-Link digital interface
- Transport outputs and digital inputs allow insertion of DG-58 into signal path for sound field correction
- Balanced and unbalanced analog outputs